The Best Umbrella Base for wind is the Abba Patio Round Steel Market Patio Umbrella Base [Amazon Link] [Wayfair Link]. Its solid steel construction, super low toe-friendly footprint, and minimalist design make it the best patio umbrella base available. While it is expensive relative to some of the bases on this list, if you’re looking to hold a large umbrella where the base is in view, a quality, attractive umbrella base weight is critical.
For a detailed review of this umbrella base weight, please see our Product Reviews section below.
- Durable and Heavy Duty Construction: This umbrella...
- Adjustable Wobble-Free Pole Holder: 2 built-in...
- Modern Flat Design: The flat round design makes...
- Easy to Use and Clean: This patio umbrella base is...
- Overall Dimensions: Neck Height 13.8", Base...
Last update on 2024-11-08 / Affiliate links / Images from Amazon Product Advertising API
Runner Up: Best Patio Umbrella Base
If you are looking to hold a smaller umbrella, or if you’re certain to use the umbrella base in conjunction with a bistro table, the TropiShade Cast Iron umbrella stand weight [Amazon Link] is a good quality unit at a decent price point.
It isn’t the most modern umbrella weight on the market, but it is highly functional, well made, and designed to channel water away.
For more information on this weighted base, please check out our Product Reviews section below.
Last update on 2024-11-08 / Affiliate links / Images from Amazon Product Advertising API
Budget Pick: Best Value Patio Umbrella Base Weight
The PatioLivingConcepts Umbrella Base 230 [Amazon Link] [Wayfair Link] is a good umbrella base weight at a very good price. It is a molded resin unit, designed to be filled with sand and positioned under a patio table. The Umbrella Base 230 will hold about 50 lbs of sand, which means it can support a fairly large patio umbrella.
Given the weight capacity and price, this is a good cheap umbrella stand. It isn’t the prettiest umbrella base, but it is designed to sit under a table, and will likely not be in view very much.
For a detailed review of the PatioLivingConcepts Umbrella Base 230, peruse our Product Reviews section below.
Last update on 2024-11-08 / Affiliate links / Images from Amazon Product Advertising API
Outdoor Umbrella Base Weight Buyer’s Guide
The major issue to be concerned with when choosing the right weighted base for your patio umbrella or market umbrella is the amount of weight needed.
For information on weighing down your patio umbrella, please check out our guide to properly weighting down a market umbrella.
What if I Have an Oversized Patio Umbrella?
Should you have a large patio umbrella that, when unfurled, spans more than 9′ in diameter, we recommend one of two options: using a supplemental weight bag or using a cantilever umbrella base. See our Umbrella Size Guide for more information.
Supplemental Weight Bag
You can use a supplemental weight bag in conjunction with many traditional market umbrella bases to add additional weight to support your large format umbrella. These units generally sit on top of the umbrella base, and can supply up to 100 lbs of additional weight!
It is an extra hassle taking them on and off, though, and if these get punctured, you’ll have a big mess to clean up.
Cantilever Umbrella Base
Many cantilever umbrella base weights function like commercial quality patio umbrella weights and can supply up to 125lbs of weight for an umbrella. To peruse those high capacity weights, please check here.
Where to Buy Umbrella Stands
You can shop for umbrella stands online or in home improvement and garden stores. Online is often easier, as you won’t need to lift a heavy umbrella base into the car, and then bring it out to the patio.
Patio Umbrella Base Weight Reviews
In this section we review several of the patio umbrella bases available on the market, looking at the design, durability, weight characteristics, and overall quality. We compare the pluses and minuses of each of these units.
If you are interested in purchasing a patio umbrella in conjunction with a weighted base, check out our patio umbrella reviews here.
Let’s look at a comparison table to get started, and then we’ll move onto individual reviews.
Last update on 2024-11-08 / Affiliate links / Images from Amazon Product Advertising API
1. Abba Patio 55 lbs Round Steel Market Patio Umbrella Base [Amazon Link] [Wayfair Link]
Abba Patio consistently makes excellent quality patio furniture with an eye for simplicity and elegance. Their streak continues with this thoughtful and attractive patio umbrella holder.
This is the best patio umbrella base for wind.
Dimensions and Weight Capacity
- Base Weight: 55lbs
- Diameter: 29″
- Height: 3.4″
- Plate Thickness: 1/4″ (approximate)
- Pole Capacity: 1″ – 1.5″ umbrella poles will work (the diameter is 1 33/64″, meaning this hole is 1/64″ larger than 1 1/2″ poles)
The Details
The Abba Patio round steel patio umbrella weight is elegantly simple. It is equipped with two hand-turning locks that provide superior grip to the umbrella pole inserted inside. This umbrella base is designed to handle the typical weight and wind forces found on a 6′-9′ umbrella.
This weighted umbrella base is made of powder-coated steel and is painted in a bronze tone. We wish Abba Patio offered black and stainless steel versions of these bases so that users could easily match their base to their patio umbrella, but alas Abba Patio currently only carries these metal umbrella stands in bronze.
Should you have a black or white umbrella shaft, you could consider purchasing some enamel paint and painting this base the same color as your umbrella pole. This is obviously impossible for those who have brushed nickel or stainless steel umbrellas (or wood, for that matter!).
This patio umbrella base can be used in conjunction with a bistro table, but it is not required (you may want to get a patio umbrella cone in this case). The weight is sufficient to generally support a 6′-9′ umbrella without a table, though if the wind is really blowing, we would suggest closing the umbrella in order to protect it.
The Abba Patio outdoor umbrella bases are made up of two parts, the first being the circular umbrella base, and the second being the vertical shaft which bolts to the base from underneath.
The Bottom Line
The Abba Patio Umbrella Base weight is a high-quality product that does what it sets out to do without unnecessary components. The base is flat and thin enough to be unobtrusive if placed under a table, and the span provides significant weight capacity. It is built to last and will serve to keep your market umbrella standing for years to come.
It is on the expensive side, but it looks great and offers a good deal of holding power.
Be sure to check the price on Wayfair before you buy!
- Durable and Heavy Duty Construction: This umbrella stand is designed...
- Adjustable Wobble-Free Pole Holder: 2 built-in adjustable knobs help...
- Modern Flat Design: The flat round design makes this easy to fit in...
- Easy to Use and Clean: This patio umbrella base is super easy to...
- Overall Dimensions: Neck Height 13.8", Base Diameter 27.4", Removable...
Last update on 2024-11-08 / Affiliate links / Images from Amazon Product Advertising API
2. TropiShade 30-Pound Bronze Powder-Coated Cast Iron Umbrella Stand
The TropiShade 30lb bronze powder coated cast iron patio umbrella base is a medium-weight umbrella stand made of cast iron with a distinctive decorative pattern. The pattern is made in such a way that rainwater underneath the umbrella stand will evaporate easily.
This base for umbrella connection is solid, with a decent 30lb of weight, and is relatively simple.
Dimensions and Weight Capacity
- Base Weight: 30lbs
- Diameter: 20″
- Height: 15″
- Plate Thickness: 3″ (approximate)
- Pole Capacity: 1 3/8″ – 1 1/2″ umbrella poles will work
The Details
This is a cast iron patio umbrella stand that will work well for an umbrella up to around 6′ in diameter. It has a single toggle lock and is capable of securing a reasonably-large umbrella.
A table is not required with this umbrella base, but the extra balance found in the combination of an umbrella base and a table is helpful, especially if you’re pushing the umbrella size.
The TropiShade Decorative Market Umbrella Base is about 3″ thick, so it has a relatively low profile. You’re unlikely to kick it or bang your feet on it if it is under a table and out of sight.
The color is a very dark bronze, with a matte finish. In a pinch, it could be used with a black umbrella pole, but it really is a bit closer to bronze than black. You could always re-paint it with a Rustoleum enamel paint if you want to get it the same color as your umbrella pole.
The Bottom Line
This is a good choice for an umbrella base if you have a 6′ umbrella or less in diameter. It is not at all modern looking, but it is reasonably attractive, and low profile.
One note: some buyers have had a problem with the pole shaft being crooked when installed into the base. If you run into this issue, we suggest contacting TropiShade for a replacement, as the umbrella shaft should be straight when properly set up.
The TropiShade 30 lb umbrella base weight is covered under a 1-year warranty, which is a nice extra. There’s not much that can go wrong with these unless you purchase a base weight that is too small for your umbrella, but a warranty is always good! Given the price point on this unit, it is a good buy and is recommended.
- Cast iron umbrella base wieghs 30 pounds with a bronze powder-coating.
- 20-inch in diameter
- Euro deco styled pattern
- One pole thumb screws secure umbrella in base
- Base is compatible with 1 3/8" and 1 1/2" umbrella poles.
Last update on 2024-11-08 / Affiliate links / Images from Amazon Product Advertising API
3. DC America 18-Inch Cast Stone Umbrella Base
The DC America line of cast stone umbrella base is a simple, well-designed set of umbrella base weights made of rust-free powder coated composite material. These are available in two different sizes, 18″ and 24″ (currently shown here in the 18″ setup), and will function both with and without a table to balance the umbrella.
Dimensions and Weight Capacity
- Base Weight: 22lbs (46lb for the 24″)
- Diameter: 18″ or 24″
- Height: 13″
- Plate Thickness: 1 1/2″ (approximate)
- Pole Capacity: 1 3/8″ – 1 1/2″ umbrella poles will work
The Details
The 18″ DC America Cast Stone Outdoor Umbrella Stand is capable of supporting a 6′ umbrella, but beyond that, it may run into issues with balance. The 24″ base will support up to a 9′ umbrella. A table is not required with these umbrella bases, but it will help stabilize the umbrella in windy conditions.
Two plastic umbrella shaft cuffs are included, one of which is designed to fit properly with 1 3/8″ umbrella shafts, and the other with 1 1/2″ umbrella shafts. These plastic cuffs are failure points on this unit and may be prone to breakage. If they break, contact DC America for replacements.
The DC America unit comes in two pieces: the disc base, and the vertical section. The vertical section bolts to the disc base, and the umbrella is installed from there. The process of setting this up is quite simple.
The Bottom Line
This line of weighted umbrella bases works well if your umbrella is the appropriate size (6′ for the 18″, and 9′ for the 24″). Both of these patio umbrella stands are pretty attractive and low profile and are priced aggressively for their weight capacity.
The DC America line of umbrella weight bases is covered under a 1-year warranty, which is a good plus. There’s rarely much that goes wrong with these, but a warranty is always beneficial.
- Cast stone , Bronze color , Rust free composite materials
- The base comes with plastic inserts that allow for a 1" or a 1 1/2"...
- Without the plastic inserts it will hold a 2" pole. Bronze...
- Ship 1 by ground-Fed-ex
- 18 inch diameter
Last update on 2024-11-08 / Affiliate links / Images from Amazon Product Advertising API
4. Abba Patio 53 lb. Square Steel Market Patio Umbrella Base Stand with Wheels [Amazon Link] [Wayfair Link]
The Abba Patio square steel umbrella base is another excellent modern, unobtrusive outside umbrella stand. This unit is 2 lbs lighter than the Abba Patio circular umbrella base, but it offers a set of wheels to allow easy maneuvering of an umbrella around a patio.
It also includes two separate poles for attachment to different umbrella dimensions.
Dimensions and Weight Capacity
- Base Weight: 55lbs
- Dimensions: 24″ x 24″
- Height: 13″
- Thickness: 1/4″ (approximate)
- Pole Capacity: 1 1/2″ and 1 7/8″ umbrella poles will work
The Details
This low profile umbrella base is a high-quality modern steel base. The square design and two wheels facilitate easy movement of the base and umbrella, however, the wheels mean that this base will likely be useful to those who only want the umbrella without a table; if this is used in conjunction with a table, the wheels become useless.
The patio umbrella stand comes in three pieces: the rectangular base, and two separate vertical tubes, each of which bolts to the weighted base. The tubes are different sizes, designed to accommodate either a 1 1/2″ or 1 7/8″ pole. These tubes have two crank bolts, which help supply even more strength to the whole system.
These Abba Patio Square Market Umbrella bases with wheels can support up to a 9′ diameter umbrella.
The flat steel plate is in direct contact with the ground, so it is possible over time that water may get under the unit and rust it. It would be wise to check from time to time, and if necessary spray paint it with Rustoleum enamel paint to refresh it.
This patio umbrella base with wheels is very thin, and will easily go under most furniture pieces if you want to position your umbrella near to a furniture piece.
The Bottom Line
Abba Patio almost always produces excellent products, and this patio umbrella stand with wheels is no exception. While the wheels don’t work great, they do offer some help when moving the umbrella around and are certainly a welcome aspect of this base.
These bases are not cheap, but they are excellent quality and will last a long time with minimal care.
Remember to check the price on Wayfair as well!
- Two separate tubes included, one holds 1-1/2" Diameter umbrella pole,...
- 53 lbs Weight support 6' - 9' Umbrella; can be used with umbrellas...
- Convenient wheels allow for base to be moved as needed Easily
- Sturdy Steel construction in Brown powder-coated finish, preventing...
- Dimensions: 24L x 24W inches; pole overall Height: 13 inches for...
Last update on 2024-11-08 / Affiliate links / Images from Amazon Product Advertising API
5. Trademark Innovations Sturdy Cement Umbrella Base, Gray
The Trademark Innovations Base is attractive, simple, and modern. It is made of durable cement and offers 44lbs of holding power, to keep your patio umbrella standing strong. The design is minimal and elegant and is well thought out.
Dimensions and Weight Capacity
- Base Weight: 40lbs
- Diameter: 20″
- Height: 4.5″
- Plate Thickness: 1/4″ (approximate)
- Pole Capacity: 1″, 1.5″, 2″ umbrella poles will work (Trademark Innovations supplies 3 plastic inserts that will reduce the diameter to one of the three options)
The Details
This market umbrella base weight is sturdy and solid, with a no-nonsense design and multiple fitting options. It is made of concrete cast in a plastic mold and is a simple black umbrella base.
These garden umbrella stands come in two pieces: the weighted disc, and the vertical piece to hold the umbrella shaft. Some users have reported problems with the nut and bolt that holds the vertical piece to the weight, and this is a failure point.
Additionally, the garden parasol stand is not packaged very well, and users have had issues with damage during shipping. If your umbrella base arrives separated or otherwise damaged, we recommend contacting Trademark Innovations immediately and asking for a replacement. Trying to fix the base is not recommended, as it will likely fall apart again with further use.
The Bottom Line
This is a nice patio table umbrella base at a decent price point for its weight capacity. It is attractive and unobtrusive and is pretty low profile.
Unfortunately, there are a couple of design flaws that make us uncomfortable recommending this umbrella stand for patio table use. While we like the look, it may be wise to pick one of the other bases on this list that offers a warranty and better material quality.
- Measures 20" in diameter and 15" high
- Made of durable cement
- Fits 1" (using the included plastic insert) or 2" diameter pole
- Weighs 44 pounds
- By Home & Comfort.
Last update on 2024-11-08 / Affiliate links / Images from Amazon Product Advertising API
6. PatioLivingConcepts Umbrella Base [Amazon Link] [Wayfair Link]
PatioLivingConcepts Umbrella Base is an effective weighted umbrella base, supplied in five different colors, though the overall design style is rather clunky. It looks a bit like a spaceship in the 1980s version of Battlestar Galactica. While normally we would be fans of a spaceship umbrella weight, we’re not so sure in this case.
Dimensions and Weight Capacity
- Base Weight: 50lbs+
- Diameter: 16″
- Height: 6 1/2″
- Pole Capacity: 1″-2″ umbrella poles will work
The Details
We don’t love the look of this patio umbrella base weight, but it certainly works well. The Umbrella Base 230 is designed to be filled with sand. The hardware is made of stainless steel, and the main housing is molded resin. The housing has a screw-cap that can be used to add weighting material.
This patio table umbrella stand is available in five colors: beige, black, bronze, green, and white. It is one of the rare white patio umbrella base weights out there.
The Umbrella Base 230 can be filled with water, but it may leak, and the cap isn’t really designed for water. If turned on end, water will almost certainly leak through the cap. But, while it’s resting flat, water may work fine. Regardless, we would suggest using sand as the weight material.
When you’re filling the base with sand, consider purchasing a funnel or even using some cardboard rolled up to enable the sand to easily go into the hole properly.
This base for a garden umbrella will hold up to a 9′ parasol and is pretty sturdy. It is not as wide as some of the other bases on this list, and it must be used in conjunction with a table for additional stability.
The hole in this table umbrella base does not go all the way through, so this cannot be placed on top of an additional base.
The Bottom Line
The Umbrella Base 230 may not be the prettiest umbrella weight bases out there, but they are very good cheap patio umbrella bases. As long as you’re using these with a table, and not pushing over a 9′ umbrella, these base weights will serve you well.
The biggest design flaw in this unit is the screw that is used to tighten the umbrella shaft to the base. If that screw strips, the base is pretty well useless. This shouldn’t happen as long as it is used in conjunction with a table.
- [Functionality] Umbrella stand provides a stabilizing foundation to...
- [Easy To Operate] Comes unweighted, but can be easily filled with sand...
- [Sturdy Construction] Durable molded resin body; locking screw-on cap;...
- [Reliable Capacity] 50-pound capacity when fully weighted; available...
- [Ideal For Outdoor Use] Intended For Use under Patio Dining Tables
Last update on 2024-11-08 / Affiliate links / Images from Amazon Product Advertising API
Leave a Reply